Avaya P550R User Manual page 143

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
d. Select Manage Links in the ATM Links column of the
virtual switch port link you want to modify. The ATM
Link for Virtual Switch Port <#> dialog box opens.
e. Select the ATM Link in the Name column of the ATM
Link for Virtual Switch port <#> you want to modify.
f. Select Modify. The Modify ATM Link <name> for
Virtual Switch Port <#> dialog box opens.
* Note: The Default Channel field does not appear for
Non-Packet Replicating VSPs.
g. Select Enable from the "Administrative Status" pull-down
menu.
h. Enter the name of the Failover (and LoadShare) link in
the Fail Over ATM link field.
* Note: This link must already exist. If it does not exist,
create it in the Create ATM Link for Virtual
Switch Port <xxx> dialog box, then return to
this step.
i. Select the Outbound Priorities in each Outbound Priority
field.
* Note: It is recommended that you do not leave these
fields set to None. If they are set to None, all
traffic tagged with that priority will be dropped.
j. Click APPLY to save changes, or CANCEL to restore the
previous settings.
k. Repeat steps a-j to enable the other link.
* Note: Both failover ATM links should list the other as
the failover link.
5. Enable the virtual switch port.
a. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens.
b. Select the switch port number for which you want to view
the ATM Uplink module information from the Switch
Ports column for the specific ATM Uplink Module. The
Switch Ports dialog box opens.
Configuring RFC 1483
4-53