Modifying Qos Sets - Avaya P550R User Manual

Modifying QoS Sets

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
8. Click Yes to remove the QoS Set or click No to restore the
previous setting.
* Note: A QoS Set that is linked to an LEC cannot be
deleted.
To modify QoS sets:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 18).
2. Click ATM in the Type column of the ATM Uplink module
you want to modify the QoS set on. The ATM Module
Information dialog box opens (Figure 19).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 20).
4. Click QoS Settings. The QoS Domains dialog box opens
(Figure 26).
5. Click Manage QoS Sets in the QoS Sets column for the QoS
set you want to manage. The QoS Sets for QoS Domain <#>
dialog box opens. Table 33 describes the Manage QoS
parameters.
6. Select the QoS Set you want to modify.
7. Click Modify. The Modify QoS Sets dialog box opens
(Figure 34).
* Note: The traffic class cannot be changed to another
traffic class. If you need to change the traffic
class, you must delete the traffic class and create
a new traffic class of the desired type.
Configuring LANE
3-19