Chapter 3
3-4
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
changing the parameters, change the Administrative
Status state to Up for the changes to take effect.
6. Use the information in Table 22 to modify your ATM network
parameters.
Table 22. ATM Network Parameters
Parameter
Multiport
ATM Address
Prefix
PNNI Level
Administrative
Status
7. Click APPLY to save your changes or click CANCEL to
restore the previous settings.
Definition
Select PNNI or Failover (UNI) mode.
Options include:
• YES - enables PNNI and
sharing ports on the module and
disables failover mode.
• NO - disables PNNI and enables fail-
over mode.
Default is No.
Enter the ATM address associated with
this module. It must match the PNNI peer
group ID of the ATM switch when
Multiport is set to Yes.
Enter the desired PNNI level. The lowest
level is 8, the highest level is 104, in
multiples of 8. The default is 96.
Select the Administrative status of the
port from the pull-down menu. Options
include:
• Up - Enables the ATM Uplink
virtual network (VNET).
• Down - Disables the ATM Uplink
VNET.
Default is Up.
load-