Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
4. Click RED Pack Settings. The RED Pack Parameters dialog
box opens
(Figure
* Note: There are four RED Pack settings available. Each
default settings can be modified.
the factory default RED Pack parameter settings.
Figure 15. RED Pack Parameters
Table 16. RED Pack Parameters
Parameter
RED Pack ID
Minimum Threshold
Configuring the ATM Uplink Module
15).
Table 16
describes the parameters.
Description
Select the RED Pack ID you want to modify.
The minimum number of cells in the queue
before packets are dropped on a random basis.
The Minimum Threshold must be lower than
the Maximum Threshold. The range is based
on the Queue Weight:
Queue Weight
-7, -8
-9
-10
Table 17
lists
Minimum Threshold
1-255
1-127
1-63
2-17