Avaya P550R User Manual page 103

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
4. Click the Static LAFT link in the Static LAFT column for the
VSP. The Static LAFTs on Virtual Switch Port <ID> dialog box
opens (Figure 73).
* Note: Routed VSPs do not support Static LAFT entries and
therefore do not have a Static LAFT link.
Figure 73. Static LAFTs on VSP <ID> Dialog Box
5. Click the CREATE button. The Create Static LAFT for VSP
<ID> dialog box opens
Figure 74. Create Static LAFT for VSP <ID>
6. Enter the MAC address and associated ATM Link for the Static
LAFT Entry.
* Note: The ATM Link must exist in the VSP and the name is
also case sensitive. If entered incorrectly, the ATM
Uplink module will enter a value of None for the ATM
Link name.
7. Click the APPLY button to save your changes or CANCEL to
reset the fields to blanks. If you click APPLY, you are
returned to the Static LAFTs for VSP <ID> dialog box
(Figure 75)
Configuring RFC 1483
(Figure 74)
4-13