Chapter 4
4-32
6. Click one of the following:
•
Create UBR
•
Create CBR
•
Create rtVBR
•
Create nrtVBR
The Create PVC for ATM Link <xxx> dialog box opens
(Figure
84).
* Note: The Create PVC dialog box may vary slightly,
depending on the PVC traffic class set (CBR is
shown) you chose to create.
Figure 84. Create PVC for ATM Link <xxx> Dialog Box
7. Use the parameters described
class set.
8. Click APPLY to save your changes or click CANCEL to exit
the Create PVC dialog box without saving changes.
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
Table 83
to create your PVC