Deleting Qos Sets - Avaya P550R User Manual

Chapter 3

Deleting QoS Sets

3-18
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
6. Complete one of the following:
Click DELETE. The Delete QoS Set dialog box opens.
—
Refer to "Deleting QoS Sets", later in this chapter.
Click MODIFY. The Modify QoS Set dialog box opens
—
(Figure 34). Refer to "Modifying QoS Sets", later in this
chapter.
Click CREATE UBR. The QoS Set Creation dialog box
—
opens (Figure 36). Refer to "Creating a QoS Set", later in
this chapter for more information.
Click CREATE CBR. The QoS Set Creation dialog box
—
opens (Figure 36). Refer to "Creating a QoS Set", later in
this chapter for more information.
Click CREATE rtVBR. The QoS Set Creation dialog box
—
opens (Figure 36). Refer to "Creating a QoS Set", later in
this chapter for more information.
Click CREATE nrtVBR. The QoS Set Creation dialog box
—
opens (Figure 36). Refer to "Creating a QoS Set", later in
this chapter for more information.
To delete QoS sets:
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 18).
2. Click ATM in the Type column of the ATM Uplink module
you want to delete the QoS set from. The ATM Module
Information dialog box opens (Figure 19).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 20).
4. Click QoS Settings. The QoS Domains dialog box opens
(Figure 26).
5. Click Manage QoS Sets in the QoS Sets column for the QoS
set you want to manage. The QoS Sets for QoS Domain <#>
dialog box opens. Table 33 describes the Manage QoS
parameters.
6. Select the QoS Set you want to delete.
7. Click DELETE. The Delete QoS Set dialog box opens.