Avaya P550R User Manual page 62

Chapter 3
3-20
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
Figure 34. Modify QoS Set Dialog Box
8. Use the parameters described in Table 35 to modify your QoS
set.
9. Click APPLY to save your changes or click CANCEL to
restore the previous settings.
Table 35. QoS Set Creation Parameters
Parameter Definition
Name Enter a user-assigned name for the set being
created. The default is "defaultBES1".
QoS Handle Enter the handle to the QoS Set. The handle acts
as an internal reference number. Each QoS set
must have a unique QoS handle on a given ATM
Uplink module.
Inbound Priority Enter the Ethernet priority to be assigned to
Map frames received on a VC created with this traffic
class.