Avaya P550R User Manual page 50

Chapter 3
3-8
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
1. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens
(Figure 18).
2. Click ATM in the Type column of the ATM Uplink module
you want to modify. The ATM Module Information dialog box
opens (Figure 19).
3. Click Additional Configuration. The ATM Configuration
dialog box opens (Figure 20).
4. Click Signaling Settings. The ATM Network (Signalling
Settings) dialog box opens (Figure 21).
5. Select the ID of the virtual port you want to modify in the ID
column of the Virtual Ports table.
6. Click Modify. The Modify Virtual Port dialog box opens
(Figure 25).
* Note: To change the virtual port parameters, the
Administrative Status state must be Down.
After modifying the parameters, change the
Administrative Status state to Up for the
changes to take effect.
Figure 25. Modify Virtual Ports Dialog Box
7. Select the parameters you want to modify.