Viewing Poe Information For Switch Ports Using Edm - Avaya 3500 series Getting Started

Name
PowerPresent

Viewing PoE information for switch ports using EDM

Use this procedure to display the PoE configuration for switch ports.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click Chassis.
3. Click Ports.
4. In the work area, click the PoE tab.
PoE tab field descriptions
The following table describes the fields on the PoE tab.
Name
AdminEnable
DetectionStatus
Getting Started
Viewing PoE information for switch ports using EDM
Description
Specifies the currently used power source.
Available power sources are AC and DC.
A value of acOnly indicates that the only
power supply is AC. A value of dcOnly
indicates that the only power supply is DC. A
values of acDc indicates that there are two
power supplies; both AC and DC are
supplying power.
Description
Lets you enable or disable PoE on this port.
By default, PoE is enabled.
Displays the operational status of the power-
device detecting mode on the specified port:
• disabled: detecting function disabled.
• searching: detecting function is enabled
and the system is searching for a valid
powered device on this port.
• deliveringPower: detection found a valid
powered device and the port is delivering
power.
• fault: power-specific fault detected on port
March 2013 117