Avaya P550R User Manual page 73

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
Table 42. LEC Switch Port Parameters
Parameter
Administrative
Status
QoS Domain
Join Method
Server ATM Address
Client Selector
Max Unknown
Frame Count
Max Unknown
Frame Time
LE ARP Trigger
Count
Definition
Select the Administrative Status of the port
from the pull-down menu. Options are:
• Enabled
• Disabled - Default
Select the QoS Domain associated with this
port. The default value is defaultDomain.
Select the Join Method used by this port.
Values are:
• LECS - Default
• LES
Enter the Server ATM Address associated with
this LECS port. The server ATM server address
is the well-known ATM Forum address:
C5007900000000000000000000-
00A03E000001-00 (hex).
For a V1 LEC, the well-known address is:
47007900000000000000000000-
00A03E000001-00 (hex).
* Note:
The server ATM address is based
on the join-method
Enter the Client Selector. The valid range is
0 - FF (hex). You must use a unique value for
each client.
Enter the Maximum number of Unknown
Frames sent to the BUS. Range is 2-31. The
Default is 10. It must be greater than the LE
ARP (Address Resolution Protocol) Trigger
Count.
Enter the maximum time frame over which
the Max Unknown Frame Count applies. The
Default is 1 second.
Enter the number of frames that should be
sent via the BUS before trying to set up a
direct connection. Range is 1-30. Must be less
than the Max Unknown Frame Count.
Configuring LANE
.
3-31