Avaya P550R User Manual page 59

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink Module User Guide, Version 2.0
Table 33. Manage QoS Sets Dialog Box Parameters
Parameter
Handle
Name
Inbound Priority
Mapping
Traffic Class
Traffic Class
Parameters
RED Pack ID
Definition
The QoS set handle number. The handle
acts as the internal reference number. Every
QoS set configured on the ATM Uplink
module must have a unique handle.
The QoS set name. Every QoS Domain and
QoS Set must have a unique name.
The priority assigned to frames received on
virtual circuits opened by this QoS set.
The service class. Classes include:
• UBR
• nrtVBR
• rtVBR
• CBR
Note:
Refer to "Creating a QoS Set", later
in this chapter, for more
information about Service Class
Parameters.
You cannot change the Traffic Class with
the Web once a QoS Set is created.
However, you can use the CLI command
set qos-set (traffic-class) to change the
QoS Set's Traffic Class. Refer to the ATM
Uplink CLI Reference Guide for more
information.
The service class parameters for each QoS
set. Service class parameters include:
• CDVT - Cell Delay Variation
Tolerance
• PCR - Peak Cell Rate
• SCR - Sustained Cell Rate
• MBS - Maximum Burst Size
Note:
For more information on the traffic
class parameters, refer to
Table 35.
The RED pack ID. Refer to "Configuring
RED Pack Parameters" in Chapter 2 for
more information.
Configuring LANE
3-17