Avaya P550R User Manual page 133

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
b. Select the switch port number for which you want to
modify the virtual switch port from the Switch Ports
column for the specific ATM Uplink Module. The Switch
Ports dialog box opens.
c. Select Manage Virtual Switch Ports. The Virtual Switch
Ports dialog box opens.
* Note: You may have to scroll down to see the Manage
Virtual Switch Ports link.
d. Select the ID of the virtual switch port you want to modify.
e. Select Modify. The Modify Virtual Switch Port dialog box
opens.
* Notes:
• Make sure you enter the PVC you have created to use
on this link in the Default PVC field.
• If Packet Replication is turned on, the Default PVC is
not displayed except when the VSP is Routed.
f. Select Disable from the "Administrative Status" pull-down
menu.
g. Enter the default PVC. The first value is the physical port
number, the second number is the VPI, and the third
number is the VCI, separated by dashes.
h. Select Disable from the "Load Share" pull-down menu.
* Notes:
• You can modify the other parameters if necessary.
• Make sure you enter the PVC (created in step 3) you
have created to use on this link.
i. Click Apply to save your changes, or Cancel to restore
previous settings.
j. Select Enable from the "Administrative Status" pull-down
menu.
k. Click Apply to save your changes, or Cancel to restore
previous settings.
Configuring RFC 1483
4-43