Chapter 4
4-8
4. Click Create. The Create Virtual Switch Port dialog box opens
(Figure
67).
Figure 67. Create Virtual Switch Port Dialog Box
5. Use the parameters described in
virtual port.
Table 68. Virtual Switch Port Parameters
Parameter
Definition
Name
Enter the user-assigned name for the virtual
switch port. (1 - 31 Characters)
Type
Select the type of switch port.
Options are:
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
Table 68
• Simple Bridge - Used when each VC carries a
single protocol such as Ethernet or Token
Ring traffic.
• LLC Bridge - Used when the ATM Uplink
module is connected to a device that uses
LLC Multiplexing. This provides the ability
to send multiple protocols down the same
VC.
• Routed - Used when sending routed traffic
from one routed interface to another. See
Creating Routed VSPs" on
the section "
page 36
to create your