Mapping Outbound Priority - Avaya P550R User Manual

Mapping
Outbound
Priority
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink User Guide, Version 2.0.
Parameter
PCR
SCR
MBS
RED Pack ID
h. Click APPLY to save your changes or click CANCEL to
exit the Create PVC dialog box without saving changes.
4. To map outbound priority:
a. Select Modules & Ports > Configuration from the Web
Agent. The Module Information dialog box opens.
b. Select the switch port number for which you want to
modify the ATM links from the Switch Ports column for
the specific ATM Uplink Module. The Switch Ports dialog
box opens.
Configuring RFC 1483
Definition
Enter the Peak Cell Rate. This is a traffic
parameter specifying an upper bound on
the rate at which traffic can be submitted
on an ATM connection. The unit of
measurement is cells/second. The valid
range is 100 - 1412830 for OC12; 100 -
353208 for OC3.
Enter the Sustainable Cell Rate. This
traffic parameter specifies an upper bound
on the average rate of the conforming
cells of an ATM connection. The unit of
measurement is cells/second. The valid
range is 50 - 1412829 for OC12; 100 -
353208 for OC3.
Note:
This parameter is not available for
UBR or CBR.
Enter the Maximum Burst Size. This
traffic parameter specifies the maximum
number of cells allowed to arrive on a
connection in excess of the PCR without
being dropped. The valid range is 2 -
1048576. The default is 100.
Note:
This parameter is not available for
UBR or CBR.
Enter the RED Pack ID. Valid range is 1-4.
Refer to Configuring RED Pack Parameters in
Chapter 2 of the Avaya P550/P880 ATM
Uplink User Guide for more information on
RED Pack parameters.
* Note: This parameter is not
available for UBR.
4-41