Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Connect the metal clamps -2- back onto the brake light.
Note
The metal clamps -2- must be fitted in such a way that the pegs
grip on the ends of the clamps below the edge of the glass of the
brake light (if the clamps are correctly fitted, they bounce when
pressed together in direction of arrow -C-).
– Position the locking strips -1- on the light in direction of arrow
-A- secure by sliding up to the stop in direction of arrow -B-.
Note
♦
Do not forget to remove the protective film before installing the
new seal.
The assembly opening must be clean and free of all adhesive
♦
residues.
– Fit the connector -1- and connection of the windscreen washer
system -2-.
– Clip in the assembled brake light -3- back into the assembly
opening in the tailgate -arrows-.
– Perform a functional and tightness test on the brake light.
6.3
Removing and installing the high level
brake light - Octavia Combi GreenLine
Summary of components
112
Rep. gr.94 - Lights, bulbs, switches - exterior