Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
2.5.3
Removing and installing mirror adjuster
switch
Removing
– Remove top cover of the tightening handle -1- -arrow-.
– Unclip switch -21- -arrows- and take it out of the cover -1-.
– Disconnect plug.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
Note
While pressing the switch in, hold the trim panel -1- in which the
switch is located firmly from above.
– Press the switch into the trim panel until the catches click au‐
dibly.
2.6
Removing and installing the passenger
side glove box light switch
Removing
Note
The switch on right-hand drive vehicles is found on a different
side, the work flow for removing and installing is the identical.
– Remove the storage compartment in the dash panel on the
front passenger side ⇒ Body Work; Rep. gr. 70 .
– Unclip switch -2- from the catch pegs -arrows- and remove.
– Unplug connector -1-.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Press the switch into the installation location until there is an
audible click.
– Check it is functioning correctly (to check, remove the side
cover on the dash panel).
156
Rep. gr.96 - Lights, bulbs, switches - interior