1.2
Removing and installing the rear interior
light on the left and right, replace
Removing
– Carefully release the catch -arrow- with a small cross-head
screwdriver, tilt out the interior light and remove.
– Disconnect plug.
– Push out lens -arrow- and replace bulb (C5W).
Install
Installation is carried out in the reverse order.
Note
For vehicles with panoramic roof and head airbags: Fitting posi‐
tion of the interior light - the light connector points to the tail end
of the vehicle.
1.3
Removing and installing glove box light
Caution
When using the lever tool, mask points where the lever tool is
applied using commercially available adhesive tape.
Removing
– Switch off the ignition and all electrical components.
– Place a cross-head screwdriver under the lens and carefully
lever out the light.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
147
1. Interior Lights