Skoda Octavia III 2013 Workshop Manual page 112

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
Note
The LED module is integrated into the lamp and cannot be
changed separately.
– Remove bolts -arrows-.
– Remove bulb carrier.
Summary of components of light bulbs:
1 - Light bulb for the reversing light P21W (12 V, 21 W)
2 - Light bulb for the turn signal light PY21W (12 V, 21 W)
3 - Light bulb for the fog light H21W (12V, 21W)
– Module with LED diodes – brake light and side light.
Installation is carried out in the reverse order. When installing,
observe the following:
Note
Check seal for damage.
♦
♦ When installing the bulb carrier, insert the cable into the mod‐
ule with LED diodes so that it does not become crushed
between the bulb carrier and the lamp housing.
The module with LED diodes is integrated into the lamp and
♦
cannot be changed separately.
4.2.3 Tail light - Octavia Combi
– Remove tail light
⇒ "4.1 Removing and installing tail light", page 102
– To remove, turn to the left and remove the carrier with light
bulb.
Summary of components of light bulbs:
1 - Light bulb for the brake light and side light P21W (12 V, 21
W)
2 - Light bulbs for the side light W5W (12V, 5W)
3 - Light bulb for the turn signal light PY21W (12 V, 21 W)
4 - Light bulb for the fog light and side light P21W (12V, 21W)
5 - Light bulb for the reversing light P21W (12V, 21W)
104
Rep. gr.94 - Lights, bulbs, switches - exterior
.