Skoda Octavia III 2013 Workshop Manual page 90

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
1.4.2 Replacing the multifunctional bulb H15
(for main beam light, daytime running
light, side light)
WARNING
The H15 light bulb is pressurized and can burst when changing
the bulb. It is recommended to wear gloves and safety glasses
when changing bulbs.
Note
Do not touch the glass when installing the light bulb. Your fin‐
♦
gers will leave traces of grease on the glass which then
evaporate when the bulb is switched on causing it to cloud.
Pay attention to the correct fitting and undamaged seals on
♦
the plastic covers. Water ingress will destroy the headlight.
– Switch off the ignition and all electrical components.
– Remove cover -2-.
– Turn the bulb -1- to the left -arrow- and remove from the head‐
light housing.
– Installation is carried out in the reverse sequence.
1.4.3 Replacing bulb PYW24Y for the turn sig‐
nal light
Note
For changing the bulb of the turn signal light, a repair kit is
♦
supplied – light bulb, O-ring, cap and fixing screws.
Do not touch the glass when installing the light bulb. Your fin‐
♦
gers will leave traces of grease on the glass which then
evaporate when the bulb is switched on causing it to cloud.
82
Rep. gr.94 - Lights, bulbs, switches - exterior