Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Unlock catches -arrow-, tilt control unit -4- out of the holder
-5- and remove downwards and towards you.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
Note
If the vehicle voltage control unit - J519- is replaced, the new
control unit must be coded ⇒ Vehicle diagnostic tester.
2.2
Data bus diagnostic interface Gateway
⇒ "2.2.1 Summary of components", page 178
⇒ "2.2.2 Remove and install data bus diagnostic interface Gate‐
way J533 .", page 179
2.2.1
Summary of components
178
Rep. gr.97 - Wiring