Skoda Octavia III 2013 Workshop Manual page 42

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Compress plug catch -arrows-.
– Open catch clamp -arrow- and disconnect plug.
– Release and pull off other plug connections.
– Press back catches from the side and remove the unlocking
tools.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
Note
When inserting the display and control unit, on no account press
on the display or on the operating buttons, otherwise they will be
damaged.
When replacing the pairing and the coding of the Infotainment
display and control unit, see
⇒ "1.5 Electronic anti-theft coding", page 33
1.6.2 Infotainment display unit "Bolero",
"Amundsen" and "Columbus"
Special tools and workshop equipment required
♦ Release tool - T10057-
Removing
– Switch off the ignition and all electrical components.
– Insert unlocking tools into the openings in the display unit
-see fig.- until there is an audible click.
34
Rep. gr.91 - Communication
.