Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Slowly turn the ring rotor -3- manually to the left up to the stop.
– Turn ring rotor clockwise manually by approximately 3.5 rev‐
olutions so that:
•
The arrows -1- are facing each other
•
The coil spring -2- must be visible in the window between the
arrows -4-
– Install steering wheel ⇒ Body Work; Rep. gr. 69 , if necessary
lock ring rotor with transport security or adhesive tape.
8.6
Contact assignment on the steering col‐
umn electronics control unit - J527-
You can find the exact contact assignment in ⇒ Current flow dia‐
grams, Electrical fault finding and Fitting locations.
8.7
Self-diagnosis and fault indication
The steering column electronics control unit - J527- is equipped
with self-diagnosis, which facilitates the fault finding.
For fault finding use the ⇒ Vehicle diagnostic tester in the function
"Targeted fault finding".
122
Rep. gr.94 - Lights, bulbs, switches - exterior