Anti-Theft Warning System; General Points; Removing And Installing The Horn H12 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
6

Anti-theft warning system

⇒ "6.1 General points", page 162
⇒ "6.2 Removing and installing the horn H12 ", page 162
⇒ "6.3 Removing and installing interior monitoring sensor G273
and vehicle inclination sender G384 ", page 163
⇒ "6.4 Removing and installing interior monitoring deactivation
switch E267 and deactivation button for vehicle inclination sender
E360 ", page 163
6.1

General points

The functions of the anti-theft warning system are integrated in
the onboard supply control unit - J519- .
After replacing the Convenience system central control unit -
J393- or the vehicle voltage control unit - J519- , the anti-theft
warning system must be adapted with the ⇒ Vehicle diagnostic
tester.
Further information and description of function:
♦ ⇒ Owner's manual Octavia III
Fault recognition and fault display
The anti-theft warning system is equipped with self-diagnosis,
which facilitates the troubleshooting.
For fault finding use the ⇒ Vehicle diagnostic tester in the function
"Targeted fault finding".
Note
After triggering the anti-theft warning system, the alarm source
♦
which is stored in the vehicle voltage control unit - J519- is
output.
For determining the alarm source, use the ⇒ Vehicle diagnos‐
♦
tic tester in the function "Targeted functions" – "measured
value blocks".
Before assembly, the vehicle must be unlocked with the re‐
♦
lease button of the radio control receiver.
6.2 Removing and installing the horn - H12-
Note
The horn - H12- has an emergency battery which cannot be re‐
placed as a separate item.
Removing
– Switch off the ignition and all electrical components. The ve‐
hicle must not be locked via the radio control receiver of the
central locking.
– Remove the cooling water tank cover ⇒ Body Work; Rep. gr.
66 .
162
Rep. gr.96 - Lights, bulbs, switches - interior