Removing And Installing Switch Unit On The Steering Column - Skoda Octavia III 2013 Workshop Manual

7 - Transport security
8 - Screw
❑ 1.1 Nm
9 - Switch unit on the steering column
❑ with turn signal light switch - E2- and wiper switch for intermittent operation - E22-
❑ Equipment variant with cruise control system: with CCS switch - E45-
❑ Removing and installing
10 - Screw
❑ 1.1 Nm
11 - Lock with control unit for ELV - J764-
❑ Removing and installing
8.3 Removing and installing switch unit on
the steering column
Removing
– Remove steering wheel ⇒ Body Work; Rep. gr. 69 . Before
the steering wheel is removed from the steering column, the
wheels must be in the straight ahead position.
– Removing top and bottom steering column trim ⇒ Body Work;
Rep. gr. 70 .
– Pull out plug fuse -4-, push unlocking down and disconnect
plug connection -3-.
WARNING
Risk of destruction of electronic components by static dis‐
charge.
Prior to disconnecting the electrical plug connection the me‐
chanic must discharge electrostatic, for example by briefly
touching the door closure strut.
– Pull fuse -1- out downwards and press down and disconnect
plug connection -2-.
– Disconnect plug connection with wires to the ignition/starter
switch.
⇒ "8.3 Removing and installing switch unit on the steering column", page 119
⇒ "9.3 Removing and installing the ELV J764 ", page 125
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
8. Steering column switch
119