Replacing The Light Bulbs Of The Tail Light - Skoda Octavia III 2013 Workshop Manual

4.2

Replacing the light bulbs of the tail light

⇒ "4.2.1 Tail light - Octavia", page 103
⇒ "4.2.2 Tail light with LED diodes - Octavia", page 103
⇒ "4.2.3 Tail light - Octavia Combi", page 104
⇒ "4.2.4 Tail light with LED diodes - Octavia Combi", page 105
Note
Bulbs for fog light on driver side only.
4.2.1 Tail light - Octavia
– Remove tail light
⇒ "4.1 Removing and installing tail light", page 102
Note
The bulb holder is not removed when the side light (-Pos.4-) bulbs
are being replaced. To remove the bulb socket, turn to the left and
remove.
– Remove bolts -arrows-.
– Disconnect plug -1- and remove bulb holder.
Summary of components of light bulbs:
1 - Light bulb for the reversing light P21W (12V, 21W)
2 - Light bulb for the brake light and side light P21W (12 V, 21
W)
3 - Light bulb for the turn signal light PY21W (12 V, 21 W)
4 - Light bulbs for the side light W5W (12V, 5W)
5 - Light bulb for the fog light and side light H21W (12V, 21W)
Installation is carried out in the reverse order. When installing,
observe the following:
Note
Check that the bulb holder seals are undamaged.
4.2.2 Tail light with LED diodes - Octavia
– Remove tail light
⇒ "4.1 Removing and installing tail light", page 102
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
.
.
103
4. Tail lights