Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Move the control motor -1- in the direction of arrow -A-, undo
the pressure element from the groove, and remove in the di‐
rection of arrow -B-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
– Broken-out plugs -2- must be replaced by new plugs, see ⇒
Electronic Catalogue of Original Parts .
– After installing the control motor, check the function is correct.
86
Rep. gr.94 - Lights, bulbs, switches - exterior