Skoda Octavia III 2013 Workshop Manual page 100

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Take hold of bulb socket -1- and remove it while observing the
connected cable lengths -arrow-.
– Remove bulb -2- from holder -1-.
– After replacing the bulb, press socket and bulb fully into the
headlight and install cover.
2.5.2 Replacing bulbs for side light and day‐
time running light P21/5W
Note
Do not touch the glass when installing the light bulb. Your fin‐
♦
gers will leave traces of grease on the glass which then
evaporate when the bulb is switched on causing it to cloud.
♦ Pay attention to the correct fitting and undamaged seals on
the plastic covers as well as the correct positioning of the cov‐
er. Water ingress will destroy the headlight.
Headlights without LED module.
– Switch off the ignition and all electrical components.
– Remove cover -2-.
92
Rep. gr.94 - Lights, bulbs, switches - exterior