Removing And Installing Switches In Centre Console; Removing And Installing Warning Light Switch And Indicator Light Of The Front Passenger Airbag Deactivation - Skoda Octavia III 2013 Workshop Manual

– Press together the lateral securing tabs on the adjuster for the
headlamp range control -arrows-.
– Pull the adjuster for headlamp range control -A- to the rear out
of the mounting frame in the dash panel casing.
Note
The adjuster for headlamp range control and instrument lighting
rheostat form a single unit.
Installing
Installation is carried out in the reverse order. When installing,
observe the following:
– Insert the adjuster for headlamp range control into the mount‐
ing frame and press in place.
– Push the securing tabs outwards until they interlock with the
catch pegs.
2.3 Removing and installing switches in
centre console
Removing
– Switch off the ignition and all electrical components.
– Unclip gearshift cover -2- ⇒ Transmission; Rep. gr. 34 .
– Push switch -1- from below -arrow- out of the cover -2-.
– Disconnect the plug connections.
– Use a small screwdriver to push off the catch pegs
-arrows A-.
– Disconnect switch units -1- and -2- from each other
-arrows B-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
– Carefully push the connected switch units into the assembly
opening until the catches click into place audibly.
2.4 Removing and installing warning light
switch and indicator light of the front
passenger airbag deactivation
Removing
– Switch off the ignition and all electrical components.
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
2. Interior switches, in the dash panel, the centre console and the doors
153