Skoda Octavia III 2013 Workshop Manual page 29

1 - Dash panel insert
❑ with control unit in dash
panel insert - J285-
2 - Switch unit on the steering
column
❑ Equipment variant with
adaptive CCS
❑ Removing and installing
⇒ "8.3 Removing and in‐
stalling switch unit on
the steering column",
page 119
3 - Adaptive CCS switch - E45-
❑ only for vehicles with
adaptive CCS
❑ Component part of the
switch unit on the steer‐
ing column
❑ ⇒ "8.3 Removing and in‐
stalling switch unit on
the steering column",
page 119
4 - Cover
5 - Connector
6 - Clearance control control
unit - J428-
❑ Removing and installing
⇒ "7.3 Removing and in‐
stalling the clearance
control control unit J428
", page 22
❑ Calibration
⇒ "7.5 Calibrate auto‐
matic distance control",
page 23
7 - Holder for clearance control control unit - J428-
❑ On the new part, the pin bolts -Pos. 8- are pre-configured in the base position
8 - Pin bolt
❑ Adjustment bolts for clearance control control unit - J428-
❑ 2 pieces
9 - Retaining plate
❑ Removing and installing
⇒ "7.4 Removing and installing retaining plate for clearance control control unit J428 ", page 22
10 - Quick-release fitting
❑ 3 pieces
❑ Replace after disassembly
11 - Screw
❑ 2 pieces
❑ 8 Nm
Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
7. Automatic distance control (adapted CC) and Front Assist
21