Removing And Installing The Switch For The Power Window Lifter - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
– Remove the display unit for Infotainment, do not disconnect
the cables
⇒ "1.6 Removing and installing the Infotainment display/con‐
trol unit", page 33 .
– Push switch and indicator light -1- out of the central air outlets
from the rear -arrow-.
– Disconnect plug.
Install
Installation is carried out in the reverse order.
2.5 Removing and installing the switch for
the power window lifter
⇒ "2.5.1 Switch on driver side", page 154
⇒ "2.5.2 Switch on passenger side and rear", page 155
⇒ "2.5.3 Removing and installing mirror adjuster switch",
page 156
2.5.1 Switch on driver side
Note
The work sequence of assembly work is identical for all types of
switches for power windows.
Caution
When using the lever tool, mask points where the lever tool is
applied using commercially available adhesive tape.
– Switch off the ignition and all electrical components.
– Use the removal wedge - 3409- to lever out the switch -1-
-arrow A-, tilt out -arrow B- and remove.
– Disconnect plug.
154
Rep. gr.96 - Lights, bulbs, switches - interior