Removing And Installing The High Pressure Pump - Skoda Octavia III 2013 Workshop Manual

❑ Re-adjust after replacing the learning values in "Targeted Functions" ⇒ Vehicle diagnostic tester
7 - Fuel intake hose
8 - Fuel return-flow hose
9 - High pressure line
❑ between fuel distributor and high pressure pump
❑ removing
⇒ "2.9.1 Remove high pressure line between fuel distributor and the high pressure pump.", page 334
❑ follow all instructions for installation of high pressure lines
⇒ "2.9.2 Installing high pressure line", page 335
3.2 Removing and installing the high pres‐
sure pump
Special tools and workshop equipment required
♦ Counterholder - T10051-
♦ Extractor -T10489-
♦ Locking pin -T10492-
Removing
Note
Safety precautions when working on the fuel supply system
♦
⇒ "2 Safety instructions", page 3
Observe rules for cleanliness
♦
⇒ "3.1 Rules of cleanliness", page 6
Caution
Risk of damage to the high pressure pump through running dry.
♦ If the high pressure pump is removed or replaced, the fuel
system must be filled/bled before the engine is started for
the first time
⇒ "1.3 Filling/bleeding the fuel system", page 321
– Remove the toothed belt from the camshaft
⇒ "1.10 Remove the toothed belt from the camshaft",
page 49 .
– Remove high pressure line between fuel distributor and the
high pressure pump
⇒ "2.9.1 Remove high pressure line between fuel distributor
and the high pressure pump.", page 334
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
.
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
339
3. High pressure pump