Skoda Octavia III 2013 Workshop Manual page 122

Octavia III 2013 ➤ , Octavia III 2014 ➤
Electrical system - Edition 12.2014
Note
Three seal variants are possible.
♦
Self-adhesive foil or a plastic cap -2- is used in some vehicles
♦
instead of the plastic caps -3-.
By seal type:
Variant 1:
– Remove caps -3- and pierce them if necessary.
Variant 2:
– Pierce foil (the foil is perforated at the point where it is to be
pierced).
Variants 1 and 2:
– Insert key -1- (Torx key 20, key length 160-180 mm) through
the guide tube -4-.
– Unscrew screws -6- for securing the light -7- in the spoiler
-5-.
Note
The screws remain in the guide tube after they are unscrewed
-4-.
Variant 3 (installed as of CW 41/14):
– Remove the plug -2- from the cap -1-.
– Insert key (Torx key 20, key length 160-180 mm) through the
guide tube -3-.
– Screw out the fixing screws -5- of the light -6- in the spoiler
-4-.
Note
The screws remain in the guide tube after they are unscrewed
-3-.
All variants:
114
Rep. gr.94 - Lights, bulbs, switches - exterior