A H 5 00 M o ti on C on tr ol M od ul e Ma nua l
3. Click Communication Setting on the Options menu.
4. Click the Ethernet tab.
5. After users click
DVP TCP/IP in the Controller drop-down list box.
6. The users have to set the IP address of the AH500 series motion control module in the
Communication Parameter section
7. After the users select the link name created in step 5 in the Input window for an element,
they can operate the memory defined by the element by means of Ethernet.
Twelve connections at most can be created. Twelve connections can be created
simultaneously.
1 2 - 6
, they have to type a link name in the Link Name box, and select Delta