Outline To Use Scan To Ftp - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings

Outline to Use Scan to FTP

The following overview diagram shows the preparation steps for sending a
scanned file to a folder on an FTP server. Note that the underlined steps are es-
sential.
Reference
There are three types of setup items: 1) items that you can configure the set-
tings using the control panel of this machine, 2) items that you can configure
the settings using a Web browser on a client computer, 3) items that you can
3
configure the settings using both of the above. See p.37 "Initial Scanner Set-
up" for details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about the settings that this man-
ual does not cover, see the Web Status Monitor Help. For information about
how to view the Web Status Monitor, See p.84 "Accessing This Machine".
Configure [1.System Settings] on this machine See p.46 "System Settings".
Configure [General Settings] on the Web Status
Configure [2. SendScan Settings] and [4.Scan
Settings] on this machine or on the Web Status
Configure [Custom Title] settings on the Web
Configure [Send File], register [FTP Server] and
[File Name] on the Web Status Monitor
Recall the Settings on the Web Status Monitor
Reference
For the configuration items, see p.37 "Initial Scanner Setup" and for operation
of the configuration, see p.141 "Sending Scan File by Scan to FTP".
32
Monitor
Monitor
Status Monitor
See the Web Status Monitor Help.
See p.57 "Send Scan Settings".
See the Web Status Monitor Help.
See p.94 "Information to register in
[FTP Server]".
See the Web Status Monitor Help for
details about [Send File] and [File Name].
See p.100 "Recalling the Settings" for
details.