Information To Register In [Ftp Server] - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings

Information to register in [FTP Server]

You can register an FTP server address for sending a scanned data to a shared
folder on the FTP server by using: [Configuration] → [Send File Settings] → [FTP
Server] → [Add] on the Web Status Monitor. Up to 1000 FTP server addresses can
be registered.
Reference
See the Web Status Monitor Help for the information about how to register an
FTP Server address.
3
❖ ❖ ❖ ❖ Program No.
Enter a number for the FTP server address between 00001 and 50000. You can-
not enter the number already used.
Note
❒ The first unused program number is displayed as the default.
❖ ❖ ❖ ❖ FTP Server Name
Enter a name for identifying the FTP server address, using up to 80 charac-
ters.
❖ ❖ ❖ ❖ Key Display
Enter a name to appear on the control panel of this machine, using up to 16
characters. The first 16 characters of the FTP server name are automatically
used if you skip registering a key display name.
❖ ❖ ❖ ❖ Assign Title
You can assign an FTP server record under the following three types of titles
for recalling the key display name quickly on the control panel of this ma-
chine.
• Alphabet
[ABC], [DEF], [GHI], [JKL], [MNO], [PQRS], [TUV], [WXYZ]
• Custom Title
[1], [2], [3], [4], [5]
• Frequently Used Title(s)
Select "On" if you wish the FTP server record to be included in the [Freq.]
page, which is displayed as the first title for both the alphabetical and cus-
tom title lists. Select "Off" if you do not wish the item in the [Freq.] page.
Important
❒ Before assigning a custom title, it is necessary to register the custom titles
using the Web Status Monitor, and restart this machine. You cannot con-
figure [FTP Server] and [Custom Title] settings at the same time.
Note
❒ Under each of the records, the assigned items are listed by the order of reg-
istration.
94