Installing Software; List Of Files; Auto Run Program - Ricoh Network Scanning Unit A Operating Instructions Manual

Installing Software

To use a scanner connected to this machine as a network TWAIN scanner, it is
necessary that the TWAIN driver is installed on the client computer from which
you use this machine.
To use a scanner connected to the machine as a network delivery scanner, it is
essential to install the optional ScanRouter delivery software on the Delivery
software. To check an in-tray or retrieve file, it is necessary to install DeskTop-
Binder Lite on the client computer.

List of Files

CD-
Wizard for the TWAIN driver and utilities
ROM
Drive
DRIVERS TWAIN
UTILITY DeskV2
DEVMON SmartDeviceMonitor for Admin, SmartDeviceMonitor for Client
NET-
WORK

Auto Run Program

When the CD-ROM is inserted into a client computer on Windows 95/98/Me,
Windows XP, Windows 2000, Windows NT 4.0, or Windows Server 2003, the in-
staller starts automatically (Auto Run) to install the TWAIN driver and various
software.
Note
❒ Auto Run might not automatically work with the certain operating system
settings. In this case, launch "Setup.exe" located in the CD-ROM root directo-
ry.
❒ If you wish to install the software without using Auto Run, hold down the
{ { { { Shift} } } } key while inserting the CD-ROM. Keep the { { { { Shift} } } } key held down until
the client computer has finished accessing the CD-ROM.
❒ If [Cancel] is pressed during installation, the installation will be stopped and
all the remaining software will not be installed. If [Cancel] has been pressed,
reinstall the remaining software after restarting the client computer.
Limitation
❒ For installation on Windows 2000, Windows XP, Windows NT 4.0, or Win-
dows Server 2003, log in as a member of the administrators group.
TWAIN driver for Windows 95/98/Me, Windows XP, Win-
dows 2000, Windows NT 4.0, Windows Server 2003
DeskTopBinder Lite
Installing Software
103
3