Settings For Print Scan In Duplex Scanning - Ricoh Network Scanning Unit A Operating Instructions Manual

Setting Originals on a Scanner

Settings for Print Scan in Duplex Scanning

• When you perform a Print Scan operation while scanning both sides of orig-
inals, set the originals in the ADF as illustrated below, regardless of the width
of the originals.
4
• Select (2 Sided Orig. → 1 Sided Print) or (2 Sided Orig. → 2 Sided Print) to per-
form duplex scanning, by using [Duplex] under [5. Print Settings] on this ma-
chine. See p.79 "Duplex" for details.
Limitation
❒ When you select duplex scanning in a Print Scan operation, scanning of the
originals is fixed to top to top. This means that the originals must be bound
on either side.
❒ When you select 2-sided print, the printout orientation is fixed to top to
top.
❒ When the originals are bound at the top, or when you do not set the origi-
nals as illustrated above, you'll never have the printout results as expected.
114
AHQ012S