Software For Using For A Network Twain Scanner; System Requirements - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings

Software for Using for a Network TWAIN Scanner

To use a scanner connected to this machine as a network TWAIN scanner, it is
essential to install the TWAIN driver on the client computer.
If you do not have applications that work with TWAIN, it is necessary to also
install DeskTopBinder Lite. For information about the installation of DeskTop-
Binder Lite, see p.106 "DeskTopBinder Lite".

System requirements

3
Limitation
❒ On Windows NT with the RISC-based processors (MIPS R series, Alpha AXP,
or PowerPC), this driver is not available.
• Hardware
PC/AT compatible
• CPU
Pentium or faster (Pentium 150 MHz or faster recommended)
• Operating system
Microsoft Windows 95 (OSR 2 or later)
Microsoft Windows 98
Microsoft Windows Millennium Edition (Windows Me)
Microsoft Windows 2000 Professional (SP4 or later)
Microsoft Windows 2000 Server (SP4 or later)
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional
Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later)
Microsoft Windows NT Server 4.0 (Service Pack 5 or later)
Microsoft Windows Server 2003
• Memory
Operating system min. operation memory + 8 MB (64 MB or more recom-
mended)
• Hard disk space
100 MB or more
• Display resolution
800 × 600 pixels, 256 colors or higher
• Network protocol
TCP/IP
104