Before Printing Scan Data; Original Locations; About Paper Tray Settings; About Print Scan Ready Screen - Ricoh Network Scanning Unit A Operating Instructions Manual

Printing Scanned Image Files

Before Printing Scan Data

Important
❒ You need to register a printer with Web Status Monitor before using the Print
Scan function. See p.33 "Outline to Use Scan to Print" for the outline of pro-
cedures to use the function.
Reference
See p.111 "Setting Originals on a Scanner" for information about how to place
the originals on the ADF (Auto Document Feeder) or exposure glass of a scan-
ner.

Original Locations

When you perform a Print Scan operation, it is not necessary to select the loca-
tion (ADF or exposure glass) for scanning by a scanner. This machine automati-
cally detects the originals placed on the ADF or the exposure glass, and scan is
performed. Note, however, that the originals on the ADF are scanned when the
originals are placed on both of the ADF and the exposure glass.

About Paper Tray Settings

You can specify a certain paper tray of a printer by selecting [Configuration] →
[Print Scan Settings] → [Printer] → [Paper Source Tray] on the Web Status Monitor.
By using the control panel of this machine, you can select a specific printer, but
8
you cannot select a specific paper tray of a printer.

About Print Scan Ready screen

Before performing a Print Scan operation, make sure that the Select Method
screen or Print Scan initial screen is displayed on this machine's display panel.
• When the message "Select destination(s)." is displayed on the display panel,
a scanner connected to the machine is standing by for Send Scan. Press [Exit]
to return to the Select Method screen for selecting either Send Scan or Print
Scan.
148