Table of Contents
Advertisement
D D D D
If you wish to continue printing
the scanned data by scanning the
originals on the exposure glass of
the scanner, repeat the steps
C C C C
and
.
Specifying the Number of
Copies
You can specify the number of copies
within the range that you have con-
figured using [Max. Number of Copies]
in [3.Print Scan Settings] under the
Scanner Features menu.
A A A A
While the Print Scan standby
screen is displayed, enter the
number of copies you wish by us-
ing the Number keys.
The number you have entered is
displayed at the top right of the
screen
Configuring Print Settings
When you perform a Print Scan oper-
ation, you can change the settings ini-
tially displayed on the screen (which
settings are those that you have con-
figured and registered to [Default] in
[5.Print Settings] under the Scanner
Features menu).
A A A A
While the Print Scan standby
screen is displayed, press [Set-
tings].
The Print Settings screen is dis-
played.
B B B B
Select whether you configure the
print settings manually, or use
one of the user settings you have
B B B B
registered.
Reference
You can confirm the print set-
tings you have registered. See
p.153 "Confirming Print Set-
tings".
Note
❒ Press [Exit] if you wish to use the
settings you have registered to
[Default].
❒ You cannot edit and save the
settings that you have regis-
tered to [User 1], [User 2] and [Us-
er 3] here. If you wish to use one
of the user settings while chang-
ing some of them, recall the user
setting you wish to use by high-
lighting it and pressing [OK]
first. And then, change the set-
tings by selecting [Manual].
To recall registered print setting
A Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to
highlight [User 1], [User 2] or
[User 3] on the screen, and then
press [OK].
This returns to the Print Scan
standby screen, and the corre-
sponding Print Settings are dis-
played on the third line of the
screen.
Printing Scan Data
151
8
Advertisement
Table of Contents
