Settings For Print Scan In Simplex Scanning - Ricoh Network Scanning Unit A Operating Instructions Manual

❖ ❖ ❖ ❖ Simplex originals with 297mm (11") or less length
Exposure Glass
❖ ❖ ❖ ❖ Duplex Originals
Select "2 Sided:TtoT"or "2 Sided:TtoB" of the
tings for each User→[Original Settings] for the send scan function in with one
sided originals.

Settings for Print Scan in Simplex Scanning

• When you perform a Print Scan operation while scanning one side of an orig-
inal, set the original in the ADF as illustrated below, regardless of the width
of the originals.
• Select (1 Sided Orig. → 1 Sided Print) or (1 Sided Orig. → 2 Sided Print) to per-
form simplex scanning, by using [Duplex] under [5. Print Settings] on this ma-
chine. See p.79 "Duplex" for details.
Limitation
❒ When you select 2-sided print, the printout orientation is fixed to top to top.
ADF
AHQ012S
Original Orientation
ADF
or in the [Settings]→Set-
Settings
2 Sided T to T
2 Sided T to B
Settings
4
113