Smartdevicemonitor; About Smartdevicemonitor For Admin And Smartdevicemonitor For Client - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings

SmartDeviceMonitor

About SmartDeviceMonitor for Admin and SmartDeviceMonitor for Client

"SmartDeviceMonitor for Admin" is a utility software for managing multiple
scanners and printers on a network efficiently. Install this software on an admin-
istrator computer if necessary.
"SmartDeviceMonitor for Client" is a utility software for the effective use of
multiple scanners and printers on a network with IP addresses. Install this soft-
3
ware on a client computer as necessary.
This soft-
ware:
SmartDe-
viceMoni-
tor for
Admin
SmartDe-
viceMoni-
tor for
Client
Web Status
Monitor
*1
You cannot use the Ethernet board setup tool included in the SmartDeviceMonitor
for Admin when you access to this machine (it's not possible to change the device
name and the IP address of this machine). You can change the device name and the
IP address of other devices.
Note
❒ Address Management Tool on SmartDeviceMonitor for Admin is disabled.
❒ When SMNP Community Name for this machine is changed, change the
SMNP Community Name for SmartDeviceMonitor for Admin as well.
108
Manages:
Multiple scanners and
printers on the network
Multiple scanners and
printers on the network
This machine
Performs (related to
scanners):
• Changing the device
*1
name
• Changing the IP address
*1
• Displaying status
• Displaying status
• Making various set-
tings (see p.37 "Initial
Scanner Setup"
To be installed on:
Network administrator's
computer
Each of client computers
--