Configuring [System Settings] - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring [System Settings]

Reference
See p.13 "Using Keys Displayed on
the Screen" for information about
how to select the items displayed
on the screen.
Important
❒ Be sure to connect a scanner to this
machine before configuration, and
turn on the power of the scanner.
You cannot make any settings
without the connection.
A A A A
Press the { { { { User Tools} } } } key.
The Scanner Features menu is dis-
played.
B B B B
Press the { { { { 1} } } } key.
The System Settings menu is dis-
played, and "1. Function Priority"
appears as the setup item currently
selected.
C C C C
Press [Settings].
The setting screen for "1. Function
Priority" appears.
Note
❒ Pressing [Exit] returns to the
parent menu screen.
D D D D
Select the option you wish among
"Select: Send/Print", "Send Scan"
and "Print Scan."
• The option currently selected is
displayed first.
• The "*" mark appears along
with the option currently select-
ed
• Use [↑ ↑ ↑ ↑ ] or [↓ ↓ ↓ ↓ ] to display the op-
tion you wish to select.
E E E E
While the option you wish to se-
lect is displayed, press [OK].
This saves the setting you have
configured, and returns to the Sys-
tem Settings menu.
ZKJS020J
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
the previous screen.
F F F F
Configure the necessary settings
in accordance with your network
environment.
To configure network boot and
related settings when a static IP
address is assigned to this
machine
A Press [↓ ↓ ↓ ↓ Next].
"2. IP Address" appears as the
setup item currently selected.
B Press [Settings].
The setting screen for "2. IP Ad-
dress" appears.
System Settings
3
51