Selecting A Shared Folder - Ricoh Network Scanning Unit A Operating Instructions Manual

Sending Scan File by Scan to Folder
Place originals on the ADF or on the exposure glass of
6
Confirm the transmission results by using the Web Status

Selecting a Shared Folder

You can select a single shared folder
as a destination to which you send a
scanned file. Follow the steps below
to select a shared folder.
A A A A
Press the { { { { 1} } } } key.
Note
❒ You can skip this step when the
E - m a i l / S e n d F i l e s t a n d b y
screen is displayed.
The E-mail/Send File standby
screen is displayed.
132
a scanner.
Select a destination folder.
Select a file name.
Make scan settings.
Press the { { { { Start} } } } key of this machine.
Monitor.
See p.118 "Before Sending Scan
Data".
See p.132 "Selecting a Shared
Folder".
See p.134 "Selecting a File
Name".
(You can skip this process if you
do not specify a file name.)
See p.123 "Making Scan Set-
tings".
See p.127 "Performing Scan Op-
eration".
See p.129 "Checking Transmis-
sion Results".
B B B B
Press [SMB/FTP].
C C C C
Press the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [SMB], and then press [List].
The list of the shared folders regis-
tered to this machine appears.