Outline To Use Scan To Print - Ricoh Network Scanning Unit A Operating Instructions Manual

Outline to Use Scan to Print

The following overview diagram shows the preparation steps for printing a
scanned data by Print Scan. Note that the underlined steps are essential.
Reference
There are three types of setup items: 1) items that you can configure the set-
tings using the control panel of this machine, 2) items that you can configure
the settings using a Web browser on a client computer, 3) items that you can
configure the settings using both of the above. See p.37 "Initial Scanner Set-
up" for details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about the settings that this man-
ual does not cover, see the Web Status Monitor Help. For information about
how to view the Web Status Monitor, see p.84 "Accessing This Machine".
Configure [1.System Settings] on this machine See p.46 "System Settings".
Configure [Printer] and [Custom Title] settings
on the Web Status Monitor
Configure [General Settings] on the Web Status
Recall the Settings on the Web Status Monitor
Reference
For the configuration items, see p.37 "Initial Scanner Setup" and for operation
of the configuration, see p.147 "Printing Scanned Image Files".
Monitor
Outline to Use Scan to Print
See p.97 "Information to register in
[Printer]".
See the Web Status Monitor Help for
details about Custom Title settings.
See the Web Status Monitor Help.
See p.100 "Recalling the Settings" for
details.
3
33