Selecting Color/Black And White - Ricoh Network Scanning Unit A Operating Instructions Manual

C C C C
Highlight the printer you wish to
select, by using the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } }
key and then press [Select].
This selects the check box in front
of the printer name.
Note
❒ Selecting another printer auto-
matically deselects the printer
currently selected (so that the
check mark next to the printer is
cleared).
❒ While highlighting a printer
name with its check box select-
ed, press [Clear] to clear the
check box (this deselects the
printer).
D D D D
Press [OK].
This returns to the Print Scan
standby screen.
Selecting Color/Black and
White
When you perform a Print Scan oper-
ation, you can select between "Color"
scanning and "Black and White"
scanning. If you do not select this set-
ting, the default setting selected using
[Color/Black and White] (in [3.Print Scan
Settings] under the Scanner Features
menu) applies.
A A A A
While the Print Scan standby
s c r e e n i s d i s p l a y e d , p r e s s
[CLR/B&W].
B B B B
Use the { { { { 1 1 1 1 } } } } or { { { { 0 0 0 0 } } } } key to high-
light [B&W] or [CLR] on the screen.
Note
❒ When the above screen is dis-
played, currently selected op-
tion is highlighted.
C C C C
While the option you wish is
highlighted, press [OK].
This returns to the Print Scan
standby screen.
Note
❒ Pressing [Cancel] discards the
selected option, and returns to
the previous screen.
Printing Scan Data
155
8