Table of Contents
Advertisement
Setting Originals on a Scanner
Original Orientation
The default of this machine is to scan a one-sided original in the top to bottom
direction. Specify respectively when you wish to scan an original in the land-
scape direction, or a both-sided original by [4. Scan Settings] → [Default or User 1
to 3] → [11. Original Settings].
Note
❒ When using Scan to Print function, original orientation is not required to set.
❒ The items to select will vary according to a scanner connected to this machine.
If the items are not selectable, they will be displayed in gray tone.
About Location To Set Originals
4
When using the scanning function of this machine other than the network
TWAIN scan, you do not need to specify a location to set the original(s), even in
case of a scanner equipped with both the ADF (Automatic Document Feeder)
and the exposure glass.
In this case, when an original(s) is set on the ADF, it is scanned on the ADF;
when an original is set on the exposure glass, it is scanned on the exposure glass.
However, when originals are set on both the ADF and exposure glass, the one
on the ADF is scanned.
When Using Send Scan Function
Select "1 Sided" of the
Settings] for the send scan function in with one sided originals.
Settings made in [Original Settings] is valid when the [File Type] is set to [PDF]. See
p.73 "File Type" for details.
❖ ❖ ❖ ❖ Simplex originals with 297mm (11") or more length
112
or
in the [Settings]→Settings for each Users→[Original
Exposure Glass
ADF
Settings
Advertisement
Table of Contents
