Information To Register From Web Status Monitor; Information To Register In [Time Server]; Information To Register In [Send File Path] - Ricoh Network Scanning Unit A Operating Instructions Manual

Table of Contents

Information to Register from Web Status Monitor

You can register [Send Function Permission], [Time Server], [Send File Path], [FTP Server],

[Search Destinations] and [E-mail Address] as destinations for sending a scanned

data. This section describes the setup items included in these sub-menus.

This section also explains the setup items that are included in [Printer], which de-

termine a printer for the Print Scan output.

See the Web Status Monitor Help for information about the setup items that are

not described here.

It can assign a poling interval of the time server, by using: [Configuration]→[Basic

Settings]→[Time Server]

Note

❒ Be sure to reboot this machine after this configuration.

❖ ❖ ❖ ❖ Time Server IP Address

This assigns the IP address of the time server using numeric from 0 to 9. If you

do not use the time server, specify "225.225.225.225" is prohibited to use.

❖ ❖ ❖ ❖ Polling Interval

Configure the poling interval by selecting either [When Scanner On] or [Con-

stant Intervals] with the radio button. If you have selected [Constant Intervals],

enter a numeral within a range of 15 to 10080.

Note

❒ You can view all the information displayed, regardless of the screen size, but

the character line may be returned. A scroll bar may be equipped.

❒ When you shift to another screen during configuration, the configured data

will be discarded at the time.

You can register a path for sending a scanned data to a shared folder using SMB

by using: [Configuration] → [Send File Settings] → [Send File Path] → [Add] on the

Web Status Monitor. Up to 1000 destination folders can be registered.

Reference

See the Web Status Monitor Help for information about how to register a

Send File Path.

Configuring Settings Using a Web Browser

Table of Contents