System Settings; Information To Set In [System Settings] - Ricoh Network Scanning Unit A Operating Instructions Manual

Configuring the Scanner Settings

System Settings

This section describes the setup items contained in the System Settings menu.
They include an item used to select the initial screen of the machine, and basic
setup items for operating this machine on a network, such as an IP address set-
ting. This section also shows you how to configure these settings using the con-
trol panel of this machine.
Reference
The System Settings menus are available by pressing the { { { { User Tools} } } } key.
3
For the configuration using the System Settings menus, see p.51 "Configuring
[System Settings]".
See p.177 "Using Wireless LAN" when using an optional wireless LAN card.
Note
❒ The items marked with (WSM) on the titles signify that they are configured
on the Website at the Web Status Monitor.

Information to Set in [System Settings]

Note
❒ You can configure the settings that are mentioned in this section, using the
Web Status Monitor. However, you must configure the IP address setting first
using the control panel of this machine. And then, you can change the settings
on the Web Status Monitor.
❖ ❖ ❖ ❖ Function Priority
This item lets you select the initial screen that is displayed when you turn on
the power.
• Select: Send/Print
When you select this option, the "Select Method" screen is initially dis-
played. On this screen, pressing the { { { { 1} } } } key displays either the Delivery
Server standby screen or the E-mail/Send File standby screen, depending
on the settings in [6.Select Method]. Pressing the { { { { 2} } } } key displays the Print
Scan standby screen for printing a scanned data.
46